This Task Covers:
General mechanic's tool kit
One RFI filter
Remove four nuts (1), lockwashers (2), screws (6), ground wire (7), and cover (5) from receptacle (3) and frame
(8). Discard Iockwashers.
Remove RFI filter (4) from cover (5). Discard filter.
Dry cleaning solvent, P-D-680, is toxic and flammable. Always wear protective goggles
and gloves, and use only in a well-ventilated area. Avoid contact with skin, eyes, and
clothes, and DO NOT breathe vapors. DO NOT use near open flame or excessive heat.
The solvent's flash point is 100 F-138F (38C-59C). If you become dizzy while
using cleaning solvent, immediately get fresh air and medical help. If solvent contacts
eyes, immediately wash your eyes and get medical aid.
Clean mating surface of cover (5) and outer surface of receptacle (3) with dry cleaning solvent. Dry thoroughly,
Apply adhesive to cover (5) and install new RFI filter (4).
Install cover (5) and ground wire (7) to receptacle (3) and frame (8) with four screws (6), new Iockwashers (2),
and nuts (1).