TM 9-2330-246-14
4-28. CONDUIT AND FITTINGS REPLACEMENT.
This Task Covers:
b . Installation
a.
Removal
Initial Setup:
Tools/Test Equipment:
Equipment Conditions:
General mechanic's tool kit
Intervehicular cable disconnected from semitrailer
Hacksaw
Tube bender set
semitrailer.
a. REMOVAL
NOTE
Roadside interior wall of M3073A5 is illustrated. Other sections of M373A5 and other
models are similar.
Disconnect electrical wires from electrical components where conduit is being replaced.
1.
NOTE
Bondnuts are not used on all conduit connections.
2.
Remove nuts (3) and bondnuts (2) from connectors (4) on both ends of conduit (1).
Remove conduit (1) and connectors (4) from electrical components at both ends.
3.
Pull wiring through conduit (1) and remove conduit.
4.
Remove nuts (5) and connectors (4) from both ends of conduit (1).
5.
TA700180
4-51