TM 9-2330-246-14
4-38. INTERCONNECTING CABLE ASSEMBLY REPLACEMENT (Con't).
b.
INSTALLATION
1.
If removed, install two new grommets (8) in frame.
Thread interconnecting cable (2) through two grommets (8) and position for installation.
2.
Install clamp (6) on each side of rear most grommet (8) using screw (7), new Iockwasher (5), and nut (4).
3.
4.
Connect interconnecting cable (2) to main wiring harness (1). Remove tags.
5.
Connect interconnecting cable (2) to receptacle (3).
FOLLOW-ON TASKS:
Check operation of dolly lights.
4-77