4-39. DOLLY MAIN WIRING HARNESS AND BRANCHED WIRING HARNESS
This Task Covers:
b . Installation
Intervehicular cable disconnected from semitrailer
General mechanic's tool kit
Tag and disconnect main wiring harness connectors (14) from branched wiring harness connectors (13).
Disconnect main wiring harness connector (16) from cover assembly (1).
Pull main wiring harness (15) through grommets (2) and remove from dolly.
Tag and disconnect branched wiring harness connectors (6) from taillight connectors (3).
Remove screw (9) and Iockwasher (8) securing ground terminal (7) to dolly. Discard Iockwasher,
Remove two nuts (5), screws (11), and clamp (12) securing branched wiring harness (10) to dolly.
Pull branched wiring harness (10) through grommets (4) and remove from dolly.
Inspect grommets (2 and 4) for damage or corrosion. If damaged, remove grommets and discard.