4-45. AIR CONDITIONER THERMOSTAT EXTENSION CABLE ASSEMBLY
This Task Covers:
b . Installation
110-volt power disconnected from semitrailer.
General mechanic's tool kit
Tag wiring inside air conditioner (5), Remove two wirenuts (3) and disconnect cable assembly (7) from air
Remove ten screws (6) and clamps (2) from cable assembly (7).
Unplug cable assembly connector plug (1) from service receptacle.
Pull cable assembly (7) through grommet (4) in air conditioner (5) and remove.
If damaged, remove grommet (4) from air conditioner (5) and discard.