TM 9-2330-246-14
4-50. ROOF HARNESS REPAIR (Con't).
b.
TERMINAL LUG REPLACEMENT
1.
Cut terminal (5) from wire (6) and discard.
2.
Strip wire (6) to depth of new terminal (5).
Crimp new terminal (5) onto wire (6).
3.
MARKER BAND REPLACEMENT
c.
1.
Remove marker band (8) from wire (7) and discard.
Etch circuit number on new marker band (8). Refer to wiring diagrams (para 4-52).
2.
Position new marker band (8) on wire (7) and bend tabs over wire.
3.
d. TERMINAL REPLACEMENT I
1.
Slide shell (9) and sleeve (1 O) back and cut terminal (12) from wire (11). Discard terminal.
Remove sleeve (10) and shell (9) from wire (11).
2.
3.
Strip wire (11 ) to depth of new terminal (12).
4.
Slide shell (9) and sleeve (10) over wire (1 1).
Crimp new terminal (12) on wire (1 1).
5.
6.
Slide sleeve (10) and shell (9) over terminal (12).
PLUG REPLACEMENT I
e.
1.
Remove shell (15) from shell (13).
Remove plug (14) from shell (15). Discard plug.
2.
Install new plug (14) in shell (15).
3.
4.
Install shell (15) on shell (13).
FOLLOW-ON TASKS:
4-103