4-57. SERVICE BRAKE MAINTENANCE (SINGLE WHEEL CYLINDER).
This Task Covers:
Cleaning and Inspection
Four cotter pins
General mechanic's tool kit
Brake spring pliers
q Drill bit set
q Electric drill
q Retaining ring pliers
DO NOT handle brakeshoes, brakedrums, or other brake components unless area has
been properly cleaned. There may be asbestos dust on these components which can
be dangerous if you touch It or breathe It, Wear an approved filter mask and gloves.
Never use compressed air or a dry brush to clean brake components. Dust may be
removed using an Industrial-type vacuum cleaner, Clean dust or mud away from brake
components with water and a wet, soft brush or cloth. Failure to follow this warning may
result in serious illness or death to personnel.