TM 9-2330-246-14
4-57. SERVICE BRAKE MAINTENANCE (SINGLE WHEEL CYLINDER) (Con't).
NOTE
If replacing brakeshoes only, perform steps 1 through 4.
Remove return spring (12) from two grooved pins (1 O) at upper ends of brakeshoes (9).
1.
Remove locknut (15), recessed washer (16), spring (14), and recessed washer (13) securing each brakeshoe
2.
(9) to guide pin (6). Discard locknuts.
Remove two slotted washers (18) and link (17) from two anchor pins (19) and brakeshoes (9).
3.
Remove brakeshoes (9) from two anchor pins (19) and backing plate (4).
4.
Remove two cotter pins (11) and grooved pin (1 O) from each brakeshoe (9). Discard cotter pins.
5.
6.
Remove ten locknuts (l), screws (7), and backing plate (4) and assembled parts from axle (2). Discard locknuts.
7.
TA700247
4-140