TM 9-2330-246-14
4-61.
MASTER CYLINDER REPLACEMENT.
This Task Covers:
Removal
b.
Installation
a.
Initial Setup:
Materials/Parts:
Equipment Conditions:
q
q Three Iockwashers
Tools/Test Equipment:
q General mechanic's tool kit
q Drain pan
REMOVAL
a.
NOTE
Use a drain pan to catch any draining brake fluid. Clean up all spills.
Disconnect hydraulic line (8) from rear of master cylinder(1).
1.
2.
Remove three nuts (1 O) and Iockwashers (9) securing master cylinder (1) to studs on bracket (6) and to air
chamber (7). Move master cylinder to one side sufficiently to detach rubber bellows (3) and retaining ring (4).
Remove master cylinder from air chamber and bracket. Discard Iockwashers.
Loosen screw in hose clamp (12). Remove hose clamp and hose (11) from tube (2).
3.
4.
Remove tube (2) from master cylinder (1).
TA700255
4-149