TM 9-2330-246-14
4-84. SPLASHGUARD REPLACEMENT.
This Task Covers:
a.
Removal
b.
Installation
Initial Setup:
Materials/Parts:
Tools/Test Equipment:
Eight Iockwashers
General mechanic's tool kit
a. REMOVAL
1.
Remove four nuts (1), Iockwashers (2), and screws (3). Remove bracket (4) and splashguard (5) assembly from
rear crossmember. Discard Iockwashers.
2.
Remove four nuts (9), Iockwashers (8), and screws (7). Remove support plate (6) and splashguard (5) from
bracket (4). Discard Iockwashers.
b.
INSTALLATION
1.
Install splashguard (5) and supporl plate (6) on bracket (4) using four screws (7), new Iockwashers (8), and nuts
(9).
2.
Install bracket (4) and splashguard (5) assembly on rear crossmember using four screws (3), new lockwashers
(2), and nuts (l).
TA700293
4-201