TM 9-2330-246-14
4-103. POWER ENTRANCE PANEL AND SIGNAL ENTRANCE PANEL REPLACEMENT
(M348A2C, M348A2D, AND M348A2F) (Con't).
If damaged, remove retaining rings (14) from captive screws (1 2). Remove captive screws and flatwashers (13)
3.
from cover (6). Discard retaining rings.
4.
Remove rivets (1 O) securing hinge (8) to cover (6). Remove hinge. Discard rivets.
NOTE
Signal entrance panel does not have a retainer.
If bolt (11) is damaged, remove wingnut (4) and retainer (5) from bolt. Press bolt out of cover (6) and remove.
5.
If bolts (2) are damaged, remove wingnuts (16) from bolts. Press bolts out of frame (1) and remove.
6.
Remove nuts (17) from frame (l).
7.
Remove top and bottom gaskets (3) and two side gaskets (15) from cover (6). Discard gaskets.
8.
Remove coated cloth (7) from hinge (8). Discard coated cloth,
9.
TA700328
4-246