TM 9-2330-247-14&P
4-23. COMPOSITE LIGHT ASSEMBLY (Con't)
ACTION
ITEM
REMARKS
LOCATION
REMOVAL
Eight connectors (2)
Pull out and take apart.
1.
Harness clip (3)
Two screws (13)
Using 9/16 in. socket and ratchet handle with 3/8 in.
2.
Frame (4) and
drive, unscrew and take out.
and Iockwashers
composite
(12)
light assembly (11 )
Take off.
Frame (4)
Composite light
3.
assembly (11)
ROTATED 180
LAMP, LENS, AND DOOR ASSEMBLY REPLACEMENT
4.
Light body (9)
Six captive screws (6)
Using 1/4 in. flat-tip screwdriver, unscrew from light
body (9).
Door and lens assembly (5) will come off
with captive screws (6).
Using 1/4 in. flat-tip screwdriver, pry out of groove,
Preformed
Door and lens
5.
only if damaged.
packing (7)
assembly (5)
Push in, turn 1/4 turn counterclockwise, and take out.
Four lamps (8)
Light body (9)
6.
NOTE
Top lamp in composite light assembly is taillight, second
lamp is stop-turn lamp, third lamp is blackout taillight, and
bottom lamp is blackout stoplight.
Place in proper socket (10), push in, and turn 1/4 turn
Four lamps (8)
7.
clockwise.
Place in groove.
Preformed
Door and lens
8.
packing (7)
assembly (5)
TA701049
4-18