TM 9-2330-247-14&P
4-26. CHASSIS WIRING HARNESS (Con't)
ACTION
ITEM
REMARKS
LOCATION
NOTE
Some mounting hardware holds both brake line and chassis
wiring harness. On left side of frame, brake and wiring
harness clamps have to lineup before mounting hardware is
put on.
Eight harness
Eight screws (1),
a. Aline clamp and frame screw holes.
35.
b. Put screws through frame screw holes and
clamps (2)
nuts (5), and
and frame (7)
Iockwashers (4)
clamps.
c. Put Iockwashers and nuts on screws.
d. Tighten using no. 2 cross-tip screwdriver and
in. open-end wrench.
36.
Five frame holes (8)
Five grommets (6)
Put on chassis wiring harness (3) and push into
place.
and chassis wiring
harness (3)
FOLLOW-ON MAINTENANCE:
TASK ENDS HERE
TA701062
4-34