TM 9-2330-247-14&P
BACKING PLATE
This Task Covers.'
a.
b.
Removal
Installation
Initial Setup:
Equipment Conditions:
Tools/Test Equipment:
Hammer, hand, ball-peen, 3 lb
Punch, drive pin
Socket, in. drive,
in.
Socket, in. drive,
in.
Wrench, box-end,
in.
Wrench, torque, 0200 Ib.-ft. range
ACTION
REMARKS
ITEM
LOCATION
NOTE
Both backing plates are replaced in the same way. This procedure is for one; repeat for
the other.