TM 9-2330-247-14&P
HYDRAULIC TUBES AND FITTINGS (Con't)
4-37.
ACTION
ITEM
REMARKS
LOCATION
Nut (11)
Nut (15) and
Using
in. and
in. open-end box wrenches,
10.
unscrew.
hydraulic
tube (9)
11.
Nut (15) and
Using
in. and
in. open-end box wrenches,
Nut (12)
unscrew.
bracket (14)
Nut (12) and
Take off.
12.
Bracket (14)
Iockwasher (13)
Nut (17)
Tee fitting (19)
Using
in. open-end box wrench, unscrew and take
13.
and hydraulic
off.
tube (16)
Tee fitting
Hydraulic tube
Take off.
14.
(19) and
(16) and gasket
bracket (14)
(18)
INSTALLATION
Hydraulic tube
Put in place
15.
(16) and gasket
(18)
Hydraulic tube
Nut (17)
16.
Screw into tee fitting (19) and tighten using
in.
open-end box wrench.
(16) and tee
fitting (19)
Bracket (14)
Nut (15)
Put in place.
17.
Nut (15)
Lockwasher (13)
Screw in and tighten using
in. and
in. open-
18.
end box wrenches.
and nut (12)
Bracket (14)
Hydraulic tube (9)
Put in place.
19.
Nut (11)
Hydraulic tube (9)
20.
Screw in and tighten using
in. and
in. open-
end box wrenches.
and nut (15)
a. Locate screw holes in frame.
Four clamps (20)
Hydraulic tube
21.
b. Put clamps (20) on hydraulic tube (9) opposite
(9)
holes.
Hydraulic tube (8) on right side has only
two clamps (10).
Four screws (21),
Screw in and tighten using no. 2 cross-tip
Four clamps
22.
in. open-end box wrench.
screwdriver and
Iockwashers (22),
(20)
For left side only, mounting hardware for
and nuts (23)
three clamps (20) also holds chassis
wiring harness clamps. Hydraulic tube (8)
on right side has only two clamps (10) and
they do not mount with harness clamps.
4-76