TM 9-2330-247-14&P
S e c t i o n XII. BODY MAINTENANCE
FENDERS
This Task Covers:
a.
Removal
b.
Installation
Inital/ Setup:
Tools/Test Equipment:
Personnel Required: Two
Handle, ratchet, in. drive
Socket, in. drive,
in.
Wrench, box-end,
in.
ACTION
ITEM
REMARKS
LOCATION
NOTE
Both fenders are replaced in the same way. This procedure Is for one; repeat for the
other.
REMOVAL
Using
in.
Two screws (1),
1.
Support (16)
washers (2),
and fender (5)
in. box-end wrench, unscrew and
drive, and
take off.
Iockwashers (6),
and nuts (7)
With assistant holding fender in place, unscrew and
2.
Fender (5)
Two screws (4),
in. socket, ratchet handle with in.
two longer screws (8),
take off using
and frame (13)
in. box-end wrench.
drive, and
four washers (3),
Iockwashers (9),
and nuts (10)
With the aid of an assistant, take off.
Frame (13)
Fender (5)
3.
in.
Using
Two screws (15),
4.
Support (16)
in. box-end wrench, unscrew and
drive, and
washers (14),
Iockwashers (11),
take off.
and nuts (12)
Take off.
Frame (13)
Support (16)
5.
INSTALLATION
Put in place.
Support (16)
6.
Screw in until fingertight.
Two screws (15),
7.
Support (16)
washers (14),
and frame (13)
Iockwashers (11),
and nuts (12)
Put in place with the aid of an assistant.
Fender (5)
Frame (13)
8.