TM 9-2330-251-14&P
KEY
EXPECTED TEMPERATURES
+40 F to -65 F
+40F to -15F
ABOVE +15F
INTERVALS
0
0
(ABOVE -9C) (+4C to -26C) ( + 4 c `o -54 C )
LUBRICANTS
S -Semiannual
OE/HDO
(MIL-L-2104)
OEA (Note 1)
OE/HDO-10
OE/HDo-30
A -Annual
lubricating Oil, Internal
Tactical Service
OEA
(MIL-L-46167)
OEA (Note 1)
Lubricating Oil, Interns
BFS
(MIL-L-46176)
All Temperatures
Brake Fluid Silicone,
Automotive
GAA
(MIL-G-10924)
All Temperatures
Grease, Automotive
and Artillery
NOTES:
3. WHEEL BEARINGS. Every 12
months, remove,
1. FOR OPERATION OF EQUIPMENT IN PRO-
clean, and pack with GAA. Refer to TM 9-214,
TRACTED COLD TEMPERATURES BELOW 15F
Inspection, Cafe, and Maintenance of Antifrictlon
for temperatures above 15F (-26C). Lubricate
4. HUBCAP. Apply a light coating of sealing
tures below 15F (-26C), If OEA lubricant is
required to meet the temperature changes
outer surface of cap's flange prior to pressing cap
prescribed in the key, OEA lubricant is to be used
in the hub.
in place of OE/HDO-l0 lubricant for all tempera-
ture ranges where OE/HDO-10 lubricant is
5. MASTER CYLINDER. Fill master cylinder to
specified in the key.
within in. (13 mm) from top.
2. OIL CAN POINTS. Every six months lubricate
linkage pins, clevises, and all exposed adjusting
threads with OE/HDO.
3-5