TM 9-2330-251-14&P
4-19. STOPLIGHT TAILLIGHT REPLACEMENT (M416).
This Task Covers:
Installation
b.
a.
Removal
Initial Setup:
Materials/Parts:
Equipment Conditions:
InterVehicular cable disconnected from towing
q
q
q One grommet
Six Iockwashers
Tools/Test
Equipment:
General mechanic's tool kit
q
a.
REMOVAL
1.
Tag wires for installation if identification bands are missing or not legible.
Remove 3 connectors (5 and 6) from clip assembly (2) and disconnect,
2.
Remove grommet (4) from framerail (1), Discard grommet.
3.
Pull 3 connectors (5) through hole (3).
4.
Remove 2 screws (8), Iockwashers (9), external-tooth lockwashers (11), and stoplight taillight (12) from
5.
bracket (10). Discard Iockwashers.
Remove 2 nuts (14), Iockwashers (13), screws (7), and bracket (10) from framerail (1). Discard
6.
Iockwashers.
INSTALLATION
b.
1.
Install bracket (10) on framerail (1) with 2 screws (7), new Iockwashers (13), and nuts (14).
TA503904
4-18