TM 9-2330-251-14&P
4-27. HANDBRAKE CABLE ASSEMBLY REPLACEMENT.
This Task Covers:
a.
Removal
Installation
b.
Initial Setup:
Equipment Conditions:
MaterialslParts:
M416:
Hubs and brakedrums removed (M416A1)
q
Five cotter pins
q
Six Iockwashers
Tools/Test Equipment:
M416A1:
General mechanic's tool kit
q
Three cotter pins
q
q Four Iockwashers
a.
REMOVAL
WARNING
if trailer is not coupled to towing vehicle, ensure that wheels are securely chocked.
Failure to do so may cause trailer to roll, resulting in injury to personnel or damage
to equipment.
1.
Remove cotter pin (8), flatwasher (7), and pin
(6) and disconnect clevis (2) from handbrake
lever (1). Discard cotter pin.
2.
Remove cotter pin (5) and connecting link (3)
with clevis (2) from bell crank (4). Discard cot-
ter pin.
Remove cotter pin (9), slotted nut (10), and shoulder bolt (22) securing bell crank (4) to crossmember
3.
(11 ). Remove bell crank from crossmember and adjusting rod (21). Discard cotter pin.
TA503919
4-34