TM
9-2330-251-14&P
4-27. HANDBRAKE CABLE ASSEMBLY REPLACEMENT (Con't).
NOTE
Steps 11 through 13 are for M416A1 only.
Unhook handbrake cable assembly (19) from
11.
lever (30).
Remove handbrake cable assembly (19) from
12.
backing plate (29).
Repeat steps 11 and 12 for opposite side.
13.
INSTALLATION
b.
WARNING
If trailer is not coupled to towing vehicle, ensure that wheels are securely chocked.
Failure to do so may cause trailer to roll, resulting in injury to personnel or damage
to equipment.
NOTE
Steps 1 through 3 are for M416A1 only.
Thread handbrake cable assembly (19) through backing plate (29).
1.
Connect handbrake cable assembly (19) to lever (30).
2.
Repeat steps 1 and 2 for opposite side.
3.
NOTE
Steps 4 through 6 are for M416 only.
Install handbrake cable assembly (19) on back-
4.
ing plate (29) with screw (26), new Iockwasher
(27), and nut (28).
Connect handbrake cable assembly (19) to
5.
pawl (24) with pin (25) and new cotter pin (23).
Repeat steps 4 and 5 for opposite side.
6.
TA503921
4-36