TM 9-2330-251-14&P
4-34. HYDRAULIC BRAKE LINES, HOSES, AND FITTINGS REPLACEMENT (M416A1 ) (Con't).
3.
Remove 3 screws (12) and clamps (13) securing tube assembly (5) to chassis (11). Remove tube
assembly.
4.
Remove 3 clamps (13) from tube assembly (5).
b.
TUBE ASSEMBLY REMOVAL, COUPLING TO HOSE ASSEMBLY
NOTE
A suitable container should be used to catch any draining brake fluid. Ensure that all
spills are cleaned up.
1.
Remove coupling (3) from tube assembly (6).
2.
Loosen inverted nut (9) and disconnect tube assembly (6) from hose assembly (10).
3.
Remove screw (8) and clamp (7) securing tube assembly (6) to crossmember (2). Remove tube
assembly.
4.
Remove clamp (7) from tube assembly (6).
TA503935
4-52