TM 9-2330-251-14&P
4-36. HUB, WHEEL BEARING, AND BRAKEDRUM MAINTENANCE (M416) (Con't).
2.
Remove dust cap (14) from hub (7).
Remove nut (13) and keywasher (12).
3.
4.
Remove nut (11) and keywasher (10).
Remove outer bearing (9) from hub (7).
5.
Remove hub (7) and brakedrum (2) assembly from spindle (15).
6.
b. DISASSEMBLY
Remove oil seal (3) from hub (7) and discard.
1.
Remove inner bearing (4) from hub (7).
2.
NOTE
Hub (7) and brakedrum (2) assembly with inner and outer bearing cups (5 and 8)
should remain assembled if brakedrum is to be repaired at direct support
maintenance. If complete disassembly is required, continue with step 3.
Remove inner and outer bearing cups (5 and 8).
3.
4.
Tap out 5 shoulder bolts (1). Separate hub (7) from brakedrum (2).
TA503942
4-59