TM 9-2330-251-14&P
4-36. HUB, WHEEL BEARING, AND BRAKEDRUM MAINTENANCE (M416) (Con't).
2.
Rotate hub (7) and brakedrum (2) 1 full turn.
While rocking hub (7) and brakedrum (2) back and forth, loosen nut (11) until a slight looseness is felt.
3.
4.
While rocking hub (7) and brakedrum (2), slowly tighten nut (11) until looseness disappears.
Install keywasher (12) and nut (13) on spindle (15). Fully tighten nut.
5.
6.
Lightly coat flange of dust cap (14) with sealing compound. Install dust cap on hub (7).
7.
Raise chassis (6) using a suitable floor jack positioned under axle near wheel. Remove jackstand from
chassis.
FOLLOW-ON TASKS:
TA503943
4-61