TM 9-2330-271-14&P
(4) Two loading jack stand assemblies,
consisting of two upper plate assemblies, eight supports
and two base assemblies.
(5) Tool box assembly (refer to Basic Issue
Items, appendix B, for listing of tools included in
assembly).
c. Loading Procedure.
(1) Place towing vehicle, semitrailer and K-
Loader on runway near C141 aircraft. Apply brakes.
Towing vehicle must remain attached as long as loading
jacks are in use.
CAUTION
Adapters are very heavy. Use caution in
handling them.
(2) Remove contents from aircraft loading kit
stowage box.
(3) Remove the stowage box and set it aside
for loading in aircraft.
(4) Pull out curbside and roadside lifting eyes
between the front and rear wheels.
(5) Hang adapters on lifting eyes and secure
them with safety bars. Make sure they are seated
properly on the sidewalls.
Figure 4-1. Aircraft loading kit installed.
(6) Position jacks and stands under adapters
Figure 4-2. Loading jacks and stands in position.
4-2