TM 9-2330-285-14&P/TO 36A11-21-10-1
S e c t i o n Ill OPERATION UNDER USUAL CONDITIONS
Page
Page
Preparation for Use . . . . . . . . . . . . . . . . . . . . 2-16
After Use . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2-31
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-28
PREPARATION FOR USE
NOTE
If the dolly set is already in a raised position, go right to step 8.
Perform the operator/crew preventive maintenance checks and services in the before (B) column
before doing the procedures below.
Preparing Dolly Set For Transport Without A Shelter
1.
Open four manual valves (1) by turning handles counterclockwise.
Turn two pump levers (2) to the RAISE position.
2.
Remove two hydraulic pump handles (3) from the toolbox (4). Put handles into the
3.
two hydraulic pumps (5).
NOTE
Have a helper operate the pump on one dolly while you operate the other.
4.
Operate the hydraulic pump handles (3) and raise dollies together until four strut
assemblies (6) are straight.
Secure four strut assemblies (6) with four clamps (7) by tightening wingnuts on
5.
each.
6.
Close four manual valves (1) by turning clockwise.
7.
Stow pump handles (3) in the toolbox (4).