TM 9-2330-285-14&P/TO 36A11-21-10-1
PREPARATION FOR USE - CONTINUED
Preparing Dolly Set For Transport Of A Shelter - Continued
7. Remove two binder bolts (1) by using jack handle (2) as a wrench.
8. Separate dollies by unhooking lifting lips (3) from each other.
CAUTION
Be sure that interdolly cable and airhose is not connected before attempting to
separate dollies.
NOTE
Front dolly should normally be positioned at the end of the shelter that is furthest
from door.
9. Using towbar (4) as a positioning lever, roll the front dolly into position at the
front of the shelter.
TA 221634
2-21