TM 9-2330-285-14&P/TO 36A11-21-10-1
PREPARATION FOR USE - CONTINUED
Preparing Dolly Set For Transport Of A Shelter - Continued
19.
Apply handbrake by pulling lever (1) on rear dolly.
CAUTION
Inflate the air cushions to the psi specified on the data plate (figure 31, item 5).
This must be done before lifting the load as stated on the data plate (figure 32, item 2).
20. Move levers (2) on the front and rear hydraulic pumps (3) to the RAISE position.
21.
Position the two pump handles (4) in the hydraulic pumps (3).
NOTE
When raising the shelter, have a helper operate one pump while you operate the other.
This will raise the shelter evenly.
22. Using pump handles (4), raise shelter until all struts (5) are straight.
TA 221637
2-24
Change 1