TM 9-2330-285-14&P/TO 36A11-21-10-1
PREPARATION FOR USE - CONTINUED
Attaching Dolly Set To Towing Vehicle
1. With an assistant guiding you, back towing vehicle up to aline pintle (1) with
Iunette (2).
2. Place Iunette (2) into pintle (1).
3. Connect two safety chains (3) to towing vehicle.
NOTE
Early model dolly sets are equipped to operate on a 12- or 24-volt electrical
system. A seven-pin connector is provided to plug into a 24-volt electrical
system and a 12-pin connector is provided to plug into a 12-volt electrical
system.
4.
Connect intervehicular cable (4) to receptacle (5) on towing vehicle.
5.
Connect the service (6) and emergency (7) intervehicular airhoses to gladhand fittings
(8) and (9) on the towing vehicle.
6.
Check the operation of brakes and lights.
7.
Release the parking brake lever (10).
TA 221640