TM 9-2330-285-14&P/TO 36A11-21-10-1
OPERATION - CONTINUED
WARNING
Operating the dolly set on the highway without struts and clamps attached could
cause loss of control and serious injury to personnel.
CAUTION
This configuration is for temporary or emergency use. Using this configuration over
extended periods could damage hydraulic cylinders.
NOTE
The following procedure begins with the shelter fully raised on the dolly set. The
pump levers must be in the RAISED position.
1.
Loosen the strut clamp (1) located on each of four strut assemblies (2).
2. With manual valves (3) closed, remove Iockpins (4) and hitch pins (5) securing the
ends of four strut assemblies (2) to adapters (6).
TA 221641