TM 9-2330-285-14&P/TO 36A11-21-10-1
AFTER USE - CONTINUED
Uncoupling Dolly Set From Shelter - Continued
NOTE
On earlier configurations the towbar is used as the positioning bar and must be
removed. If you are working with a later configuration, skip steps 9 and 10 and use
the positioning bar located between the adapter arms.
10.
Take off towbar (2) by taking out Iockpin (3) and pivot pin (4).
11.
Hook positioning bar (5) into pintle (6) on the rear dolly. Use it as a lever to
move dolly from the shelter into position with the front dolly for coupling.
TA 221646