TM 9-2330-285-14&P/TO 36A11-21-10-1
ORGANIZATIONAL TROUBLESHOOTING - CONTINUED
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
7. BRAKES GRAB OR ARE LOCKED - ONE WHEEL
NOTE
If wheel is locked, go to step 1. If brake is grabbing on affected wheel, go directly
to step 2.
Adjust brake on locked wheel to free it. If unable to free wheel,
go on to step 2.
Step 2. Check for malfunction in service brake assembly (page 4-96).
a. Check service brake assembly for:
1. Cracked, broken, or contaminated linings.
2. Frozen wheel cylinder.
3. Broken return springs.
TIRES
8. ONE OR MORE TIRES WEAR UNEVENLY
NOTE
If the rear dolly is wearing tires unevenly, proceed directly to step 3.
Step 1. Check front wheel toe-in and aline if necessary (page 4-66). If alinement is
good, go to step 2. If unable to aline, go to step 3.
Check for loose kingpins, tie rod ends and steering arm pivot bushing
Step 2.
Repair any loose parts in front axle (page 4-82). If no parts are
loose, go on to step 3.
Step 3. Check for bent axle, knuckles, spindles, etc.
4-19