TM 9-2330-285-14&P/TO 36A11-21-10-1
FRONT WHEEL TOE-IN - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
2 Left and right
Four nuts (1) and
Loosen using a 9/16-inch wrench and a 9/16-
inch socket wrench.
side tie rods
four screws (2)
Toe-in bar (3)
Attach toe-in bar (3) to rear inside edges
3 Rear inside edges
of tire. Bar should be situated so that two
of front tires
reference chains (4) just touch the ground.
Record toe-in bar reading.
4 Dolly set
Toe-in bar (3)
Slowly roll the dolly set backwards until
the toe-in bar (3) is in front of the axle.
The bar should be at the height where the
reference chains (4) just touch the ground.
The reading on the toe-in bar should
be 1/4 inch less in front of the axle
than it was behind the axle.
TA 221691
4-67