TM 9-2330-285-14&P/TO 36A11-21-10-1
STEERING KNUCKLES - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION - CONTINUED
14 Steering knuckle
Tie rod socket
a. Push socket (1) into steering knuckle (4).
(1), nut (2) and
b. Using 3/4-inch box wrench, screw on nut
(2) and tighten.
cotter pin (3)
c. Using pliers, put in new cotter pin (3).
15 Steering
Backing plate
a. Put backing plate (5) on.
knuckle (4)
(5), six screws
b. Secure with six screws (6) and six nuts
(6) and six
(7) using a 9/16-inch box wrench and a
nuts (7)
9/16-inch socket wrench.
16 Front axle
Brake tube (8),
a. Secure brake tube (8) to brake hose (9)
brake hose (9)
using 5/8-inch and 7/16-inch wrenches.
and clip (10)
b. Snap in clip (10).
FOLLOW-ON MAINTENANCE:
TASK ENDS HERE
TA 221696
4-73