TM 9-2330-285-14&P/TO 36A11-21-10-1
STEERING ARM
This task covers:
INITIAL SETUP
Materials/Parts
Tools
New cotter pins
5/32-inch socket head wrench
Hammer, hand
Equipment Condition
Punch
Tie rod end separator
Diagonal cutting pliers
3/4-inch wrench
ACTION
REMARKS
ITEM
LOCATION
REMOVAL
a. Remove cotter pins (2) using diagonal
1 Steering arm (1)
Two cotter pins
pliers.
(2) and two
b. Remove nuts (3) using a 3/4-inch wrench.
nuts (3)
Throw away old cotter pins.
Remove from steering arm (1) using tie rod
2
Two tie rod
end separator.
sockets (4)
Remove using a 5/32-inch socket head wrench
3
Cover (5), gasket
(6), two screws
(7) and two
washers (8)
Remove using a hammer and punch.
4
Headless pin (9)
Remove using a hammer and punch.
5
Pivot pin (10), two
Remove steering arm (1).
bearings (11) and
INSTALLATION
a. Position steering arm (1) on axle.
6 Front axle
Steering arm
(1) and pivot
pin (10)
c. Install pivot pin (10).