TM 9-2330-285-14&P/TO 36A11-21-10-1
HANDBRAKE SYSTEM - CONTINUED
ACTION
REMARKS
ITEM
LOCATION
LEVER INSTALLATION
a. Position assembly (2) in lever (1).
11 Lever (1)
Cable and link
b. Secure with pin (3).
assembly (2),
c. Secure pin (3) with washer (4) and a
pin (3), washer
new cotter pin (5).
(4) and cotter
pin (5)
a. Secure assembly (2) to lever (1) screw (6)
12
Screw (6), nut
and spacer (8).
(7), spacer (8)
Screw goes through two clamps (10).
and washer (9)
b. Secure screw (6) with nut (7) and washer
(9) using two 1/2-inch wrenches.
NOTE
Step 13 applies to late models only. Step 14 applies to
early models only.
13 Bottom side of
Secure lever (1) with screws (11) and washers
Lever (1), three
(13) using a 1/2-inch wrench.
rear axle beam
screws (11),
Spacers (12) are in between the legs
three spacers
of lever (1).
(12) and three
washers (13)
14 Rear brake chamber
Secure lever (1) with screws (14), nuts (16)
Lever (1), three
and washers (17).
screws (14), three
bracket
Spacers (15) are in between legs of
spacers (15),
lever (1).
three nuts
(16) and three
washers (17)