TM 9-2330-285-14&P/TO 36A11-21-10.1
HYDRAULIC PUMP - CONTINUED
ACTION
ITEM
REMARKS
LOCATION
ASSEMBLY - CONTINUED
26 Pump body (1)
Nut (2) and
Put in using a flat-tip screwdriver.
three new valve
Do not tighten nut (2) at this time.
disks (3)
27
Spindle (4)
a. Screw in part way.
b. Tighten nut (2) using flat-tip
screwdriver.
28
Handle (5)
a. Turn spindle (4) clockwise until end is
firmly seated. You may use handle (5) to
turn the spindle (4).
Do not tighten.
b. Put handle (5) on spindle in the RAISE
position.
Screw (6) and
Put in using flat-tip screwdriver.
29
washer (7)
TA 221774
5-15