TM 9-2330-287-14&P
SERVICE BRAKE - CONTINUED
ACTION
ITEM
REMARKS
LOCATION
INSPECTION CRITERIA
Lining (2) and
a. Inspect shoes (1) for cracks.
12. Brakeshoe (1)
rivets (3)
b. Inspect linings (2) for cracks, loose-
ness to shoes (1), or a thickness of
at least 1/8 inch (3.2 millimeters).
c. Inspect rivets (3) for looseness.
Rivets (3) also should beat least
1/16 inch (1.6 millimeters) below
the surface of the lining (2).
ASSEMBLY
Pins (3, 4,5, and
Using 9/16-inch socket, extension, and
13. Brakeshoes (1 and 2)
6), four nuts (7),
handle, install.
and four lock.
washers (8)
Four capscrews (10),
Using 9/16-inch socket, extension,
14. Backing plate (9)
four Iockwashers
handle, and wrench, install.
(11), four nuts (12),
adjuster (13), and
cable guide (14)
Four capscrews (10),
Using 9/16-inch socket, extension,
15.
four Iockwashers
handle, and wrench, install.
(11), four nuts (12),
and adjuster (15)
Brakeshoe (2)
Place in position.
16.
Nut (16), Iockwasher
Using 7/16-inch socket, install.
17. Brakeshoe (2)
(17), flat washer
to backing
(18), sleeve (19), and
plate (9)
bolt (20)
TA224793