TM 9-2330-287-14&P
HYDRAULIC LINE REPLACEMENT - CONTINUED
ACTION
ITEM
REMARKS
LOCATION
MASTER CYLINDER TO AXLE FLEX HOSE - CONTINUED
Fitting (3)
Using 7/16- and 5/8-inch wrenches,
1. Master cylinder(l)
loosen.
to line (2)
Fitting (5)
Using 7/16-inch wrench, loosen.
2. Hose (4) to line (2)
Line (2)
Remove.
3. Master cylinder (1)
Discard line (2).
to hose (4)
Place in position.
New line (2)
4.
Fitting (5)
Using 7/16-inch wrench, tighten.
5. Hose (4) to new
line (2)
Fitting (3)
Using 7/16- and 5/8-inch wrenches,
6. Master cylinder (1)
to new line (2)
tighten.
AXLE FLEX HOSE
Fitting (5)
Using 7/16-inch wrench, loosen,
7. Hose (4) to line (2)
Nut (7)
Using 15/16- and 5/8-inch wrenches,
8. Hose (4) to
remove.
bracket (6)
Hose (4)
Using 5/8-inch wrench, remove.
9. Axle tee (8)
Discard hose (4).
Using 5/8-inch wrench, install.
10.
New hose (4)
Nut (7)
Using 5/8- and 15/16-inch wrenches,
11. New hose (4) to
install.
bracket (6)
Fitting (5)
Using 7/16-inch wrench, tighten.
12. New hose (4) to
line (2)
AXLE TEE TO LEFT SERVICE BRAKE
Fitting (10)
Using 7/16-inch wrench, loosen.
13. Line (9) to axle
tee (8)