TM 9-2330-287-14&P
AIRHOSE, REACH TUBE - CONTINUED
ACTION
REMARKS
ITEM
LOCATION
REMOVAL - CONTINUED
Using 1- and 1 1/16-inch wrenches,
Nut (2) and hose (3)
2. Fitting(1)
remove.
Using socket and handle, remove.
Four Capcrews
3. Plate (4)
(5) and four lock-
washers (6)
Remove.
Plate (4)
4. Reach tube, forward
section (7)
Using 1- and 1 1/16-inch wrenches,
Nut (9) and
5. Fitting (8)
remove.
hose (10)
NOTE
Repeat steps 2 thru 5 for opposite side.
Disconnect.
Airhoses (12) and
6. Reach tube, rear
wire harness (13)
section (11)
Using socket and handle, remove.
Four capscrews (15),
7. Plate (14)
four Iockwashers
Antirotation bracket (17) applies to
(16), and antirotation
model M796A1 only.
bracket (17)
Remove.
Plate (14)
8. Reach tube, rear
section (11)
4-80