TM 9-2330-287-14&P
SPARE WHEEL STORAGE ASSEMBLY
This task covers:
INITIAL SETUP
Materials/Parts
Tools
Cotter pin
Handle, reversible, 3/8-inch square
drive
Equipment Condition
Pliers, diagonal-cutting
Socket, 7/16- by 3/8-inch
square drive
Socket, 3/4- by 318-inch square
drive
Wrench, socket-head, 1/8-inch
Wrench, open-end, 7/8-inch
ACTION
ITEM
LOCATION
REMARKS
DISASSEMBLY
U-bolt (2), two nuts
Using 7/16-inch socket and handle,
1. Member (1)
(3), clip (4), and
remove.
cable (5)
U-bolt (7), two nuts
Using 7/16-inch socket and handle,
2. Shaft (6)
(8), and cable (5)
remove.
Two setscrews (10)
Using socket-head wrench, loosen.
3. Flanges (9)
Cotter pin (11)
Using pliers, remove.
4. Shaft (6)
and washer (12)
Shaft (6) and
a. Remove shaft (6) from bracket (13).
5. Bracket (13)
two flanges (9)
b. Remove flanges (9) from shaft (6).
Shaft (6)
Remove.
6. Frame (14)