TM 9-2330-287-14&P
LANDING LEG REPAIR (M796) - CONTINUED
ACTION
REMARKS
ITEM
LOCATION
DISASSEMBLY
Using 3/4-inch socket, handle with 3/8-
Two capscrews (3),
1. Legs (1) to outer
inch square drive, and 3/4-inch wrench,
two nuts (4), and
tube (2)
remove.
lock bar (5)
Using 1/2-inch socket and handle with
Capscrew (6), lock-
2.
3/8-inch square drive, remove.
washer (7), washer
(8), and crank (9)
Using 3/4-inch socket, handle with 3/8-
Four capscrews (10),
3.
inch square drive, and 3/4-inch wrench,
four nuts (11), and
remove.
two legs (1)
Using pliers, remove.
Cotter pin (13)
4. Nut (12)
Using 1 1/2-inch socket, handle with 1/2-
Castellated nut (12),
5. Swivel plate (14)
inch square drive, and 1 1/2-inch wrench,
capscrew (15), and
remove.
spacer (16)
Remove.
Wheel and tire (17)
6.
Using pliers, remove.
Cotter pin (19)
7. Nut (18)
Using 2-inch socket and handle with 1/2-
Castellated nut (18),
8. Swivel plate (14)
inch square drive, remove.
washer (20), and
bearing cone (21)
TA224839