TM 9-2330-294-14
4-25. Stationary
Clearance Light
Assembly
4-24. Frame
Bracket Assembly Replacement or
Replacement
Repair
a. Removal.
a. Replace.
(1) Remove retractable clearance light housing
and washers securing bracket to frame.
(2) Disconnect clearance light electrical con-
(2) For front frame bracket assembly remove
nector(s) at main wiring harness connection.
(3) Push shell onto lead, remove C washer, and
to frame. For rear frame bracket assembly remove
pull shell from lead(s).
four cap screws and lock washers securing bracket to
(4) Remove screw and two external tooth lock
frame. Replace frame bracket assembly, and install
washers securing wiring harness ground to bracket.
in reverse order of removal.
(5) Remove bracket and marker light.
b. Repair. Remove cotter pin, self-locking nut,
b. Installation. Replace or repair damaged parts
two washers and handle. Replace damaged or
and install in reverse order of removal (a above).
missing parts and install in reverse order of removal.