TM 9-2330-294-14
Figure 6-2. Front equalizer beam and axle measurement and inspection points.
beam, the lubrication grooves must lie at
groundward side of beam, where they can
a. Install center bushing using 50-ton arbor press
receive lubricant flow through gravity.
and replacer (CRP 102291). Lubricate outer metal of
bushing pressing into beam.
b. Install seals using brass hammer and replacer
(CRP 102291). Reverse the position of replacer (fig,
NOTE
6-3) for driving the seals into the beam. .
When pressing center bushing into equalizer