TM 9-2330-297-14&P
PREPARATION FOR USE - CONTINUED
1. Stow rear bumper on front semitrailer chassis See page 3-15.
2. Rotate handle (1) up to clear retaining angle (2). Pull out lockpin (3) on both sides of rear crossmember on front
semitrailer chassis.
3. Rotate handle (4) up to clear retaining angle (5) and pull out lockpin (6).
4. Pull coupling rod (7) out of sleeve (8) and turn it over.
5. Push coupling rod (7) into front of sleeve (8) with pointed end of coupling rod facing forward on front of
semitrailer chassis.
6. Aline coupling rod hole (9) with hole (10) in sleeve (8).
7. Insert lockpin (6) all the way through holes (9) and (10).
8. Rotate handle (4) to down position between sleeve (8) and retaining angle (5).
2-19