OPERATOR TROUBLESHOOTING - CONTINUED
TEST OR INSPECTION
8. TWO UNITS CANNOT BE COUPLED WITH CONTAINERS MOUNTED.
Step 1. Check that the two units are properly alined.
Realine the two units as described on page 2-19.
Step 2. Check that the rear trailer wheels are properly chocked.
Chock the rear trailer wheels properly.
Step 3. Check coupling rods (1) and sleeves (2) for corrosion and damage.
Clean coupling rods (1) and sleeves (2) of all corrosion.
If coupling rods (1) or sleeves (2) are damaged, notify organizational maintenance.
If the above steps do not correct the problem, notify organizational maintenance.