TM 9-2330-297-14&P
MARKER LIGHT
This task covers:
b. Installation (page 4-23)
INITIAL SETUP
Tools
Screwdriver, flat-tip
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1.Marker light
Lens (1)
Using screwdriver, pry lens (1) off light
base (2).
2.
Terminal (3),
a. Pull terminal (3) from harness
screws (4), light
connector (6).
base (2) and
b. Using screwdriver, remove two
gasket (5)
screws (4).
c. Remove light base (2) and gasket (5).
INSTALLATION
3.
Gasket (5), light
a. Assemble parts
base (2), screws
b. Using screwdriver, tighten two
(4) and terminal (3)
screws (4).
c. Push terminal (3) into harness
connector (6).
4.
Lens (1)
Place lens (1) on light base (2) and
push to snap it into place.
4-23