TM 9-2330-2971 4&P
FRONT HARNESS - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
5. Front
Grommet (8)
a Using screwdriver, pry out.
crossmember
b. Remove from front harness (9).
6.
Front harness (9)
a. Remove from chassis through holes (11)
and resistor box (10)
and (12)
b. Untie guide string from front harness (9).
Leave string attached to chassis.
INSTALLATION
7. Front
Front harness (9)
a
Tie guide string to front harness (9) at
crossmember
and resistor box (10)
end opposite resistor box (10).
b. Using guide string, draw front harness
(9) into chassis through holes (12)
and (11)
c. Remove guide string from front har-
ness (9).
TA2231 32
4-39