TM 9-2330-297-14&P
BRAKE CHAMBER
This task covers.
a. Removal (page 4-68)
b Disassembly (page 4-68)
INITIAL SETUP
Tools
Materials/Parts
Pliers, diagonal cutting
New diaphragm
Wrench, adjustable, 12-inch
Cotter pin (as required)
Wrench, open-end, 518-inch
(two required)
Equipment Condition
Wrench, open-end, 314-inch
Wrench, open-end, 13/16-inch
Air reservoir draincock opened.
Wrench, open-end, 7/8-inch
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
NOTE
Procedures given are for one brake chamber.
1.
Brake chamber
Airhose (1)
Using 314- and 7/8-inch open-end
wrenches, remove hose (1) from brake
chamber (2).
2.
Slack adjuster
Cotter pin (3)
a. Using cutting pliers, remove and dis-
and clevis pin (4)
card cotter pin (3).
b. Remove clevis pin (4).
3.
Axle
Brake chamber (2)
a. Using 13/16-inch open-end wrench,
remove two nuts (5) and two lock-
washers (6).
b. Remove brake chamber (2).
DISASSEMBLY
4.
Brake chamber
Clevis yoke (7)
a. Using 13116-inch open-end and adjust-
and jamnut (8)
able wrenches, loosen jamnut (8).
b. Remove clevis yoke (7) and jamnut (8).
4-48