TM 9-2330-297-14&P
Section XI. LANDING GEAR MAINTENANCE
Page
Page
Landing Gear Leg ............................................
Landing Gear Gearbox .............................
LANDING GEAR LEG
This task covers
INITIAL SETUP
Tools
Tools - Continued
Hammer, ball-peen
Socket, 3/4- by 112-inch square drive
Jack stands (two required)
Socket, 15/16- by 1/2-inch square drive
Punch, drive-pin, 1/4-inch tip
Socket, 1 1/16- by 1/2-inch square drive
Wrench, box-end, 9/16-inch
1/2-inch square drive
Wrench, box-end, 3/4-inch
Socket, 9/16- by 1/2-inch square
Wrench, box-end, 15/16-inch
drive
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1.
Left and right
Four wheel
Place in front and back of wheels (2).
wheels
chocks (1)
2.
Semitrailer
Jack stands (3)
Using a hoist, raise chassis and place
chassis
stands (3) under chassis frame (4).
4-85