TM 9-2330-297-14&P
LANDING GEAR LEG - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
DISASSEMBLY - CONTINUED
11.
Landing gear
Nut (1) and
Using 1 1/16-inch socket, remove nut (1)
leg
washer (2)
and washer (2).
12.
Jackscrew (3)
Bevel gear (4)
Using puller, remove gear (4) and key (5).
13.
Outer leg (6)
Inner leg (7)
Pull inner leg (7) out of outer leg (6).
14.
Bearing (8) and
Remove bearing (8) and washer (9) from
washer (9)
jackscrew (5).
15.
Flange bearing (10)
Remove flange bearing (10) from outer
leg (6).
ASSEMBLY
16.
Landing gear
Washer (2), bearing
a. Place washer (2) and bearing (8) on
leg
(8), flange bearing
jackscrew (3).
(10), inner leg (7)
b. Place flange bearing (10) in outer
and outer leg (6)
leg (6).
c. Insert inner leg (7) in outer leg (6).
17.
Bevel gear (4),
a. Place bevel gear (4) on jackscrew (3),
key (5), washer
alining slots for key (5).
(2) and nut (1)
b. Using hammer and 1/4-inch punch, tap
key (5) fully into slot.
c. Using 1 1/16-inch socket, install washer
(2) and nut (1).
18.
Sandshoe (11)
a. Position sandshoe (11) and insert
axle (1 2).
b. Place collars (13) on axle (12).
c. Using 9116-inch socket and 916-inch
wrench, install capscrew (14), and
nut (15).
INSTALLATION
19.
Semitrailer
Lateral support (16)
a. Place lateral support (16) in position.
chassis
b. Using 9116-inch socket and box-end
wrenches, install bolt (17) and nut (18)
4-88